+ Reply to Thread
Results 1 to 8 of 8
  1. Member
    Join Date
    Feb 2017
    Location
    New York
    Posts
    60

    Certifications
    CompTIA A+ N+
    #1

    Question Which WIC Modules to use for my home lab?

    Just got my Lab kit for a great price on craigslist.

    Come complete with 3x 1841 Routers and 1x 3550 switch and 2x 2950 switch

    but the Routers come with WIC-2A/S

    should i swap them out for WIC-1DSU-T1-V2? and how many do i need? just one per router?
    Reply With Quote Quote  

  2. SS -->
  3. Burn Baby Burn! Cisco Inferno's Avatar
    Join Date
    Oct 2010
    Location
    Denver, CO
    Posts
    959

    Certifications
    CCNA:R/S, MCSA:2012, MS Specialist: Server Virtualization, MCDST, A+, N+, S+, A.A:CIS
    #2
    There's just like two commands to know for serial, is just remember them.
    and yes use the T1 cards. It's more modern. Just google how to set them up. That's what I did.
    2017 Goals
    [x] MCSA: Server 2012 [X]70-410 [X]70-411 [x]74-409

    Reply With Quote Quote  

  4. Member
    Join Date
    Feb 2017
    Location
    New York
    Posts
    60

    Certifications
    CompTIA A+ N+
    #3
    so i should go ahead and order three Modules?

    and by setting them up you mean installing them inside the router and then configuring in the terminal?
    Reply With Quote Quote  

  5. Burn Baby Burn! Cisco Inferno's Avatar
    Join Date
    Oct 2010
    Location
    Denver, CO
    Posts
    959

    Certifications
    CCNA:R/S, MCSA:2012, MS Specialist: Server Virtualization, MCDST, A+, N+, S+, A.A:CIS
    #4
    -double post-
    Last edited by Cisco Inferno; 07-26-2017 at 11:00 PM.
    2017 Goals
    [x] MCSA: Server 2012 [X]70-410 [X]70-411 [x]74-409

    Reply With Quote Quote  

  6. Burn Baby Burn! Cisco Inferno's Avatar
    Join Date
    Oct 2010
    Location
    Denver, CO
    Posts
    959

    Certifications
    CCNA:R/S, MCSA:2012, MS Specialist: Server Virtualization, MCDST, A+, N+, S+, A.A:CIS
    #5
    Quote Originally Posted by Jacinto1023 View Post
    so i should go ahead and order three Modules? and by setting them up you mean installing them inside the router and then configuring in the terminal?
    What you want to do is configure a point to point connection between your routers.
    So for instance, you will need to set clock speed, encapsulation etc the same way you would with Serial just a little different.


    here's some example config to be done on both side

    R1
    =====
    configure terminal
    interface Serial0/0
    ip address 192.168.1.1 255.255.255.0
    service-module t1 timeslots 1-24
    service-module t1 linecode b8zs
    service-module t1 framing esf
    service-module t1 clock source internal
    no shutdown



    R2
    =====
    configure terminal
    interface Serial0/0
    ip address 192.168.1.2 255.255.255.0
    service-module t1 timeslots 1-24
    service-module t1 linecode b8zs
    service-module t1 framing esf
    service-module t1 clock source line
    no shutdown


    Now you can ping between them, and play with routing protocols etc. Also, you can get these cards for about $5 each. Id say buy one extra, I've had one dud out of 6 ordered. Theres also a thriving counterfeit market, so you might wanna google up how to tell them apart. always order from the us when on ebay.
    Last edited by Cisco Inferno; 07-27-2017 at 01:21 AM.
    2017 Goals
    [x] MCSA: Server 2012 [X]70-410 [X]70-411 [x]74-409

    Reply With Quote Quote  

  7. Member
    Join Date
    Feb 2017
    Location
    New York
    Posts
    60

    Certifications
    CompTIA A+ N+
    #6
    Got it! thanks

    ordered a pack of 4 for $20 shipped from ebay US

    guaranteed Genuine Cisco and working with warranty
    Reply With Quote Quote  

  8. Junior Member Registered Member
    Join Date
    Jul 2017
    Posts
    3
    #7
    can anyone please assist me with an updated ccna 200-125 dumps, i have been reading my study guide for sometime now so i kinda need dumps now so that i can start wrapping up and get set to seat for the exam. thnx alot. u can send to damsconas at yahoo dot com.
    who ever has just written the exam can aswell drop some some useful materials or links to get useful materials for the exam.
    Reply With Quote Quote  

  9. Senior Member
    Join Date
    May 2017
    Location
    Southeast
    Posts
    102
    #8
    This isn't a place you will get any kind of help with something like that. The people here are the ones who spend countless hours actually learning topics because dumps are a disservice to everyone. Just wait until you get crucified in an interview one day because they aren't going to ask the questions on the test, they're going to sit you down at a switch/router and say "config this with this protocol". Just something to think about....
    Reply With Quote Quote  

+ Reply to Thread

Social Networking & Bookmarks