+ Reply to Thread
Results 1 to 3 of 3
  1. Junior Member packetx's Avatar
    Join Date
    Feb 2017
    Location
    Somewhere in France
    Posts
    14

    Certifications
    CCENT
    #1

    Exclamation IPv6 SLAAC on Switch virtual intreface

    Hi guys,

    (sorry for the mispelling, english is not my native language, i'm french)

    I can't assign an ipv6 address using SLAAC on my 3550 switches.

    SW1(config-if)#ipv6 address ?
    WORD General prefix name
    X:X:X:X::X IPv6 link-local address
    X:X:X:X::X/<0-128> IPv6 prefix
    autoconfig Obtain address using autoconfiguration

    --------------------but----

    SW1#sh ipv6 int
    Vlan1 is up, line protocol is up
    IPv6 is enabled, link-local address is FE80::20F:23FF:FE28:FE80
    No global unicast address is configured
    Joined group address(es):
    FF02::1
    FF02::1:FF28:FE80
    MTU is 1500 bytes
    ICMP error messages limited to one every 100 milliseconds
    ICMP redirects are enabled
    ND DAD is enabled, number of DAD attempts: 1
    ND reachable time is 30000 milliseconds


    I don't understand...we are on the default vlan and direct link with router1. It worked on the on the same switch PC, but not on SVI.

    After a debug, when i taped the command the router1 receive the RS and send RA in response.

    *Mar 1 02:36:42.951: ICMPv6-ND: Received NA for FE80::20F:23FF:FE28:FE80 on FastEthernet0/0 from FE80::20F:23FF:FE28:FE80
    R1#
    *Mar 1 02:36:44.951: ICMPv6-ND: Received RS on FastEthernet0/0 from FE80::20F:23FF:FE28:FE80
    *Mar 1 02:36:44.951: ICMPv6-ND: Sending RA to FF02::1 on FastEthernet0/0
    *Mar 1 02:36:44.951: ICMPv6-ND: MTU = 1500
    *Mar 1 02:36:44.951: ICMPv6-ND: prefix = FD13:2456::/64 onlink autoconfig
    *Mar 1 02:36:44.951: ICMPv6-ND: 2592000/604800 (valid/preferred)
    *Mar 1 02:36:44.951: IPV6: source FE80::20D:BDFF:FEA4:AF20 (local)
    *Mar 1 02:36:44.955: dest FF02::1 (FastEthernet0/0)
    *Mar 1 02:36:44.955: traffic class 224, flow 0x0, len 104+1396, prot 58, hops 255, originating
    *Mar 1 02:36:44.955: IPv6: Sending on FastEthernet0/0
    R1#
    *Mar 1 02:36:48.951: ICMPv6-ND: Received RS on FastEthernet0/0 from FE80::20F:23FF:FE28:FE80
    *Mar 1 02:36:48.951: ICMPv6-ND: Sending RA to FF02::1 on FastEthernet0/0
    *Mar 1 02:36:48.951: ICMPv6-ND: MTU = 1500
    *Mar 1 02:36:48.951: ICMPv6-ND: prefix = FD13:2456::/64 onlink autoconfig
    *Mar 1 02:36:48.951: ICMPv6-ND: 2592000/604800 (valid/preferred)
    *Mar 1 02:36:48.951: IPV6: source FE80::20D:BDFF:FEA4:AF20 (local)
    *Mar 1 02:36:48.955: dest FF02::1 (FastEthernet0/0)
    *Mar 1 02:36:48.955: traffic class 224, flow 0x0, len 104+1396, prot 58, hops 255, originating
    *Mar 1 02:36:48.955: IPv6: Sending on FastEthernet0/0
    R1#
    *Mar 1 02:36:52.951: ICMPv6-ND: Received RS on FastEthernet0/0 from FE80::20F:23FF:FE28:FE80
    *Mar 1 02:36:52.951: ICMPv6-ND: Sending RA to FF02::1 on FastEthernet0/0
    *Mar 1 02:36:52.951: ICMPv6-ND: MTU = 1500
    *Mar 1 02:36:52.951: ICMPv6-ND: prefix = FD13:2456::/64 onlink autoconfig
    *Mar 1 02:36:52.951: ICMPv6-ND: 2592000/604800 (valid/preferred)
    *Mar 1 02:36:52.951: IPV6: source FE80::20D:BDFF:FEA4:AF20 (local)
    *Mar 1 02:36:52.955: dest FF02::1 (FastEthernet0/0)
    *Mar 1 02:36:52.955: traffic class 224, flow 0x0, len 104+1396, prot 58, hops 255, originating
    *Mar 1 02:36:52.955: IPv6: Sending on FastEthernet0/0

    but I don't see the RS coming on the interface vlan 1..
    SW1(config-if)#ipv6 address autoconfig
    SW1(config-if)#
    *Mar 1 00:31:19.495: ICMPv6-ND: Sending NS for FE80::20F:23FF:FE28:FE80 on Vlan1
    *Mar 1 00:31:19.495: IPV6: source :: (local)
    *Mar 1 00:31:19.495: dest FF02::1:FF28:FE80 (Vlan1)
    *Mar 1 00:31:19.495: traffic class 224, flow 0x0, len 64+16, prot 58, hops 255, originating
    *Mar 1 00:31:19.495: IPv6: Sending on Vlan1
    *Mar 1 00:31:20.495: ICMPv6-ND: DAD: FE80::20F:23FF:FE28:FE80 is unique.
    *Mar 1 00:31:20.495: ICMPv6-ND: Sending NA for FE80::20F:23FF:FE28:FE80 on Vlan1
    *Mar 1 00:31:2
    SW1(config-if)#0.495: IPV6: source FE80::20F:23FF:FE28:FE80 (local)
    *Mar 1 00:31:20.495: dest FF02::1 (Vlan1)
    *Mar 1 00:31:20.495: traffic class 224, flow 0x0, len 72+8, prot 58, hops 255, originating
    *Mar 1 00:31:20.495: IPv6: Sending on Vlan1
    *Mar 1 00:31:20.495: ICMPv6-ND: Address FE80::20F:23FF:FE28:FE80/10 is up on Vlan1
    SW1(config-if)#
    *Mar 1 00:31:22.495: ICMPv6-ND: Sending RS on Vlan1
    *Mar 1 00:31:22.495: IPV6: source FE80::20F:23FF:FE28:FE80 (local)
    *Mar 1 00:31:22.495: dest FF02::2 (Vlan1)
    *Mar 1 00:31:22.495: traffic class 224, flow 0x0, len 56+8, prot 58, hops 255, originating
    *Mar 1 00:31:22.495: IPv6: Sending on Vlan1
    SW1(config-if)#
    *Mar 1 00:31:26.495: ICMPv6-ND: Sending RS on Vlan1
    *Mar 1 00:31:26.495: IPV6: source FE80::20F:23FF:FE28:FE80 (local)
    *Mar 1 00:31:26.495: dest FF02::2 (Vlan1)
    *Mar 1 00:31:26.495: traffic class 224, flow 0x0, len 56+8, prot 58, hops 255, originating
    *Mar 1 00:31:26.495: IPv6: Sending on Vlan1
    SW1(config-if)#
    *Mar 1 00:31:30.495: ICMPv6-ND: Sending RS on Vlan1
    *Mar 1 00:31:30.495: IPV6: source FE80::20F:23FF:FE28:FE80 (local)
    *Mar 1 00:31:30.495: dest FF02::2 (Vlan1)
    *Mar 1 00:31:30.495: traffic class 224, flow 0x0, len 56+8, prot 58, hops 255, originating
    *Mar 1 00:31:30.495: IPv6: Sending on Vlan1


    So i'm wondering does a SVI can use SLAAC ? Or any known problem with 3550 switches ?


    Thanks guys
    Reply With Quote Quote  

  2. SS -->
  3. Senior Member
    Join Date
    Sep 2014
    Location
    Minnesota
    Posts
    766

    Certifications
    CCNA:R&S, VCA6-DCV, Sec+
    #2
    3550 switches don't support ipv6. it will pass through ipv6.
    Reply With Quote Quote  

  4. Junior Member packetx's Avatar
    Join Date
    Feb 2017
    Location
    Somewhere in France
    Posts
    14

    Certifications
    CCENT
    #3
    thanks @clarson

    After your answer, i've done a quick research and i also found that 3550 switches does not support SLAAC although the command appear in the CLI...it just don't work. it's a little bit misleading...

    here the page who a guy compare 3550 and 3560 switches: http://routeswitchlabtips.com/switch...-3550-vs-3560/

    My next SW will definetily be a 3560
    Last edited by packetx; 08-05-2017 at 02:16 AM.
    Reply With Quote Quote  

+ Reply to Thread

Social Networking & Bookmarks