+ Reply to Thread
Results 1 to 14 of 14
  1. Senior Member
    Join Date
    Dec 2012
    Location
    UK
    Posts
    225

    Certifications
    CCNP:R&S, CCNA:Voice, MSc Networking Technologies
    #1

    Default Loving CCNA Voice!

    I'm around 4 weeks in and I'm loving the voice world! 2 weeks of the 4 was pretty much trial and error setting up buying the right bits. All I need now is a super long cable to plug into my FXO port and I think thats it. I've got an inline power switch coming in 2 days to replace my other switch, just to tidy up some cables really.

    I have found the studying to be very rewarding so far. Nothing like getting your first phones registered and ringing, then setting up the IP communicators on different PC's and getting them going. I'm using a R2691 as my voice gateway and DHCP sever and the R2811 as my CME at the moment. Just tonight I have been studying dial peers and got my analog phone plugged into the 2691's FXS to call the 2811's IP phones and call back. Its all pretty exciting stuff! I have scheduled my exam for late June so hopefully I can get the book done in the next few weeks with the CBT nuggets and get troubleshooting labs going towards the end. I also have CUCM up and running on VMWare but that is waiting for next weekend. Anyway thought I'd say hi and post a pic of my lab.

    WP_20140511_20_56_24_Pro.jpg
    Reply With Quote Quote  

  2. SS -->
  3. Senior Member
    Join Date
    Jun 2009
    Location
    Gosford, Australia
    Posts
    567

    Certifications
    CCNA, CCDA, CCNA:Voice(IIUC), CCNP:Voice
    #2
    Love the network diagram stuck to the wall
    Reply With Quote Quote  

  4. Senior Member
    Join Date
    Dec 2012
    Location
    UK
    Posts
    225

    Certifications
    CCNP:R&S, CCNA:Voice, MSc Networking Technologies
    #3
    Quote Originally Posted by azaghul View Post
    Love the network diagram stuck to the wall
    Haha yeah, I drew that before I started. Might do a new one as ive changed a few bits on it. You should see my bedroom, wall covered in study notes!
    Reply With Quote Quote  

  5. Senior Member JeanM's Avatar
    Join Date
    Mar 2012
    Location
    California
    Posts
    1,105

    Certifications
    CCNA, MCP, S+, N+, A+
    #4
    Nice job! It's addicting isn't it ?!

    I am also learning the voice track and also signed up for VMware VCP5 at a local college starting in about a month after work. Will be fun!
    Reply With Quote Quote  

  6. Senior Member sacredboy's Avatar
    Join Date
    May 2012
    Location
    Australia
    Posts
    287
    #5
    wallpaper_01, dude which equipment and study material are you using?
    Best, sacredboy!
    Reply With Quote Quote  

  7. Senior Member
    Join Date
    Dec 2012
    Location
    UK
    Posts
    225

    Certifications
    CCNP:R&S, CCNA:Voice, MSc Networking Technologies
    #6
    Hey I'm using:

    Routers -
    • Cisco 2691 256/128 (DRAM/FLASH) - IOS 12.4T - CME 4.1 (Voice Gateway)
    • Cisco 2811 256/128 - IOS 12.4T - CME 7.1 (Call Manager Express Router)
    Switch -
    • Cisco Catalyst 3550 PWR - Inline Power Switch. If you get an Inline Power or POE switch, you do not need plugs for IP Phones, check phone models for support though.
    Modules -
    • NM-2V
    • VIC-2FXS (To the Analog Phone/Fax)
    • VIC-2FXO (To the PSTN)
    Note - These modules only work with my 2691 router not the 2811, which is fine for this setup, but if you want the 2811 to use them, you need to buy newer NM-HD-2V. In the US its easy to find but not the uk by the looks of it. Not Sure about Australia.

    Phones -
    • 2 x Cisco IP Phone 7940 running on P00308000500 firmware (CME 7.1)
    • 1 x Analog Phone
    • Standard PC Mic
    Software
    • IOS 12.4T on both routers
    • CME 4.1 and 7.1
    • CUCM 8
    • Cisco IP Communication
    • CCP
    For study I'm using CBT Nuggets and the Official Cert Guide. Really enjoying it so far, the book is pretty good and goes along with the nuggets as its the same guy!
    Last edited by wallpaper_01; 05-19-2014 at 11:01 AM.
    Reply With Quote Quote  

  8. Junior Member Mason83's Avatar
    Join Date
    Aug 2011
    Location
    Austin, TX
    Posts
    10

    Certifications
    MCP; MCDST; CCNA R&S; MCSA: Win Server 2k8; CCNA Voice
    #7
    REMOVED UNNECESSARY QUOTE



    I used this post to jump on eBay and buy a 2691, 2811, the modules, 2 7940 phones and a 3550 Inline Power switch. I can't thank you enough for sharing this! Quick question, as a VoIP noob, how did you connect all of this together to get it up and running?
    Last edited by Plantwiz; 07-28-2014 at 06:47 AM.
    Reply With Quote Quote  

  9. Senior Member
    Join Date
    Jul 2010
    Location
    Chicago, Illinois
    Posts
    149

    Certifications
    MCSE:2003 / CCNA/A+
    #8
    Just a suggestion...the 7970s are pretty cheap these days and they allow you to change the phones wallpaper, along with having more buttons for configuration than the 7940s/7960s. Ephone button configuration for line and extensions for call center stuff is interesting to learn using UCCX.

    and for another $125.00 you can get your hands on CUCM 8.5/9/10 ... for another $125.00 to $175.00 USD you can get a couple of cheap Supermicro intel servers to run the VMware images of CUCM/Unity/UCCX/CUPS....

    Then you can hook up your CME sites to CUCM are remote sites over frame/or VWIC MFT -T1/E1, hook up phones to CUCM as a remote site without CME, call back and forth between sites via extension number only.

    with SIP trunk out of CUCM to POTS you can simulate an enterprise voice network with just what you have being able to call out of the system via POTS and call in Via POTS.... and for not very much money...

    The problem with voice is...as with anything.... spend life's savings on all the nifty stuff.. Cisco continues to add more and different functionality with each CME/CUCM version including Video conference, and using Jabber....
    Last edited by Jollycork; 07-23-2014 at 03:03 AM.
    Reply With Quote Quote  

  10. Senior Member
    Join Date
    Jun 2009
    Location
    Gosford, Australia
    Posts
    567

    Certifications
    CCNA, CCDA, CCNA:Voice(IIUC), CCNP:Voice
    #9
    For those looking at servers to run the Voice product suite on, I've moved away from my Dell PowerEdge 2950 server and over to a Dell T5400 workstation. Similar specs, 2 x Quad core & up to 32GB RAM, though less HDD bays...however the big plus...its near silent!
    Reply With Quote Quote  

  11. Senior Member
    Join Date
    Mar 2013
    Posts
    103
    #10
    Good advice azaghul..

    The Dell PowerEdge servers are too large & too loud!
    Reply With Quote Quote  

  12. Senior Member The_Expert's Avatar
    Join Date
    Aug 2013
    Location
    East Coast - USA
    Posts
    131

    Certifications
    A few
    #11
    Thanks for sharing! Looks like you are having a lot of fun... I'm still working on ICND2, before going for the Voice track. That's ultimately where I want to be... I've done Telecom stuff in the past and so want to get back into it.
    Reply With Quote Quote  

  13. Senior Member JeanM's Avatar
    Join Date
    Mar 2012
    Location
    California
    Posts
    1,105

    Certifications
    CCNA, MCP, S+, N+, A+
    #12
    Quote Originally Posted by azaghul View Post
    For those looking at servers to run the Voice product suite on, I've moved away from my Dell PowerEdge 2950 server and over to a Dell T5400 workstation. Similar specs, 2 x Quad core & up to 32GB RAM, though less HDD bays...however the big plus...its near silent!
    Yep, you can even easily run it in your workstation/PC if you have enough RAM and let's say an I5 quad core. Dell 2950s are huge and loud, you can easily build something or upgrade the PC to handle vmware workstation for example.
    Reply With Quote Quote  

  14. Junior Member Mason83's Avatar
    Join Date
    Aug 2011
    Location
    Austin, TX
    Posts
    10

    Certifications
    MCP; MCDST; CCNA R&S; MCSA: Win Server 2k8; CCNA Voice
    #13
    I received my CCNA Voice Lab Manual yesterday and I was able to successfully configure my lab and place calls between my 2 7940 phones! It's truly an awesome feeling! wallpaper_01, I can't thank you enough for this thread!
    Reply With Quote Quote  

  15. Senior Member
    Join Date
    Feb 2011
    Location
    Denver, CO
    Posts
    277

    Certifications
    CCNA, CCENT, Network+
    #14
    hey OP, about how much did that set up cost you?
    Reply With Quote Quote  

+ Reply to Thread

Social Networking & Bookmarks