+ Reply to Thread
Results 1 to 2 of 2
  1. Senior Member JeanM's Avatar
    Join Date
    Mar 2012
    Location
    California
    Posts
    1,105

    Certifications
    CCNA, MCP, S+, N+, A+
    #1

    Default Question on assigning a number to FXS port

    Hi,

    I have 2620xm with voice-2v and vic-2fxs card configured with dial-peer pointing to 2811 router (along with 3550 switch) and can dial from the analog phone out to the 7940/7960 phones on the 2811 side . I have also configured the caller id name/number on the fxs 1/1/1 port and it shows on the 79xx side.

    What is required to make the calls from the 2811 (CME_TX 192.168.1.199) side to the FXS number on the 2620xm 192.168.1.222 router?

    This is what shows when I view the call FROM the Analog phone to the VoIP phone.

    CME_TX#sh voip rtp connections detail
    VoIP RTP active connections :
    No. CallId dstCallId LocalRTP RmtRTP LocalIP RemoteIP
    1 156 157 18320 16720 192.168.1.199 192.168.1.222
    callId 156 (dir=1): called=808 calling=6600 redirect=
    dest callId 157: called=808 calling=6600 redirect=
    1 context 48145CBC xmitFunc 40C0660C
    Found 1 active RTP connections


    CME_TX#

    Here are dial peers on the VoIP router

    dial-peer voice 2001 voip
    description *** to CALL CA ***
    destination-pattern 55..
    session target ipv4:192.168.1.200
    dtmf-relay h245-alphanumeric
    !
    dial-peer voice 3001 voip
    description *** to CALL CA 2 ***
    destination-pattern 77..
    session target ipv4:192.168.1.200
    dtmf-relay h245-alphanumeric
    !
    dial-peer voice 4001 voip
    description *** TO CALL ANALOG ROUTER ***
    destination-pattern 66..
    session target ipv4:192.168.1.222
    dtmf-relay h245-alphanumeric



    ephone-dn 1
    number 808

    label Norms phone
    name Norm
    !
    !
    ephone 1
    mac-address 0014.F243.EF4B
    speed-dial 1 2222 label "Norm"
    button 1:2
    !



    And here are the dial peers on the 2620xm router with the FXS card connected to analog phone.

    !
    dial-peer voice 4002 voip
    description *** TO DIAL TEXAS ***
    destination-pattern 11..
    session target ipv4:192.168.1.199
    dtmf-relay h245-alphanumeric
    !
    dial-peer voice 4003 voip
    description *** TO DIAL TEXAS 2 ***
    destination-pattern 80.
    session target ipv4:192.168.1.199
    dtmf-relay h245-alphanumeric
    !
    dial-peer voice 4004 voip
    description *** TO DIAL CA ***
    destination-pattern 55..
    session target ipv4:192.168.1.200
    dtmf-relay h245-alphanumeric


    ephone-dn 1
    number 6600

    !
    !
    ephone 1
    description TEST


    Issue - when dialing from the texas side (192.168.1.199) to 6600 number I am getting a busy signal (not fast busy). Dialing the other way around works fine.
    Last edited by JeanM; 11-17-2014 at 02:11 AM.
    Reply With Quote Quote  

  2. Senior Member JeanM's Avatar
    Join Date
    Mar 2012
    Location
    California
    Posts
    1,105

    Certifications
    CCNA, MCP, S+, N+, A+
    #2
    Okay, so I think I was missing this on the FXS router, is this the right way?

    dial-peer voice 11 pots
    description incoming calls to ANALOG
    destination-pattern 66..
    port 1/1/1
    !
    Reply With Quote Quote  

+ Reply to Thread

Social Networking & Bookmarks