+ Reply to Thread
Results 1 to 11 of 11
  1. Junior Member
    Join Date
    Sep 2017
    Posts
    15
    #1

    Post Help-CCNA R+S and Voice Lab

    Hello Guys,


    I am new to networking field. I need some help.I'm setting up a lab. These equipment I bought for my ccna R+S then CCNA Voice course. I would really appreciate if someone can help me to
    setup my lab and how to make the connections, IOS,Ram etc. Kindly provide me with the details of missing items and equiment to use for both the labs. Let me know from where I can get the information about
    the configuration of my lab. Thanks for your valuable time. If I have to upgrade the flash what command I can use on both router and switch. How I can setup TFTP.


    Devices:
    Routers
    ******
    ************2620xm*****************


    Router>show ver
    Cisco Internetwork Operating System Software
    IOS (tm) C2600 Software (C2600-D-M), Version 12.2(13c), RELEASE SOFTWARE (fc2)
    Copyright (c) 1986-2003 by cisco Systems, Inc.
    Compiled Fri 29-Aug-03 19:35 by pwade
    Image text-base: 0x8000808C, data-base: 0x80B459DC


    ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)


    Router uptime is 1 minute
    System returned to ROM by power-on
    System image file is "flash:c2600-d-mz.122-13c.bin"


    cisco 2620XM (MPC860P) processor (revision 0x100) with 61440K/4096K bytes of memory.
    Processor board ID JAE071202SH (1993215941)
    M860 processor: part number 5, mask 2
    Bridging software.
    X.25 software, Version 3.0.0.
    1 FastEthernet/IEEE 802.3 interface(s)
    2 Serial(sync/async) network interface(s)
    32K bytes of non-volatile configuration memory.
    16384K bytes of processor board System flash (Read/Write)


    Configuration register is 0x2142


    ***********2620xm*************


    Router>show ver
    Cisco Internetwork Operating System Software
    IOS (tm) C2600 Software (C2600-D-M), Version 12.2(29a), RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2005 by cisco Systems, Inc.
    Compiled Fri 12-Aug-05 21:12 by tinhuang
    Image text-base: 0x8000808C, data-base: 0x80B5E5A4


    ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)


    Router uptime is 1 minute
    System returned to ROM by power-on
    System image file is "flash:c2600-d-mz.122-29a.bin"


    cisco 2620XM (MPC860P) processor (revision 0x100) with 94208K/4096K bytes of memory.
    Processor board ID JAE0714031Z (1929143570)
    M860 processor: part number 5, mask 2
    Bridging software.
    X.25 software, Version 3.0.0.
    Basic Rate ISDN software, Version 1.1.
    1 FastEthernet/IEEE 802.3 interface(s)
    2 Serial(sync/async) network interface(s)
    1 ISDN Basic Rate interface(s)
    32K bytes of non-volatile configuration memory.
    16384K bytes of processor board System flash (Read/Write)


    Configuration register is 0x2102


    *************1760***********(This router has 2 pvdm card,Vwic-2mft E1 & Vwic-2mft T1 not detecting)


    Router>show ver
    Cisco IOS Software, C1700 Software (C1700-ENTBASEK9-M), Version 12.4(25a), RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2009 by Cisco Systems, Inc.
    Compiled Fri 22-May-09 20:20 by prod_rel_team


    ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)


    Router uptime is 2 minutes
    System returned to ROM by power-on
    System image file is "flash:c1700-entbasek9-mz.124-25a.bin"




    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.


    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html


    If you require further assistance please contact us by sending email to
    export@cisco.com.


    Cisco 1760 (MPC860P) processor (revision 0x400) with 85627K/12677K bytes of memory.
    Processor board ID FOC07271KE2 (2250070842), with hardware revision 0000
    MPC860P processor: part number 5, mask 2
    1 FastEthernet interface
    1 ISDN Basic Rate interface
    32K bytes of NVRAM.
    32768K bytes of processor board System flash (Read/Write)


    Configuration register is 0x2142


    Switches


    2950- 24 port
    Switch>show ver
    Cisco Internetwork Operating System Software
    IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA13, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2009 by cisco Systems, Inc.
    Compiled Fri 27-Feb-09 22:20 by amvarma
    Image text-base: 0x80010000, data-base: 0x80680000


    ROM: Bootstrap program is C2950 boot loader


    Switch uptime is 0 minutes
    System returned to ROM by power-on
    System image file is "flash:/c2950-i6k2l2q4-mz.121-22.EA13.bin"




    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.


    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html


    If you require further assistance please contact us by sending email to
    export@cisco.com.


    cisco WS-C2950T-24 (RC32300) processor (revision R0) with 19912K bytes of memory.
    Processor board ID FOC0932ZC09
    Last reset from system-reset
    Running Enhanced Image
    24 FastEthernet/IEEE 802.3 interface(s)
    2 Gigabit Ethernet/IEEE 802.3 interface(s)


    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:15:2B:71:9C:80
    Motherboard assembly number: 73-6114-10
    Power supply part number: 34-0965-01
    Motherboard serial number: FOC09320YT7
    Power supply serial number: DAB0930DNWX
    Model revision number: R0
    Motherboard revision number: A0
    Model number: WS-C2950T-24
    System serial number: FOC0932ZC09
    Configuration register is 0xF


    2950- 24 port
    SW29xx>show ver
    Cisco Internetwork Operating System Software
    IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(19)EA1c, RELEASE SOFTWARE (fc2)
    Copyright (c) 1986-2004 by cisco Systems, Inc.
    Compiled Mon 02-Feb-04 23:29 by yenanh
    Image text-base: 0x80010000, data-base: 0x8058A000


    ROM: Bootstrap program is C2950 boot loader


    SW29xx uptime is 2 minutes
    System returned to ROM by power-on
    System image file is "flash:/c2950-i6q4l2-mz.121-19.EA1c.bin"


    cisco WS-C2950T-24 (RC32300) processor (revision P0) with 20808K bytes of memory.
    Processor board ID FOC0822X3C6
    Last reset from system-reset
    Running Enhanced Image
    24 FastEthernet/IEEE 802.3 interface(s)
    2 Gigabit Ethernet/IEEE 802.3 interface(s)


    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:11:21:F1:4B:40
    Motherboard assembly number: 73-6114-10
    Power supply part number: 34-0965-01
    Motherboard serial number: FOC08220N7Y
    Power supply serial number: DAB08188ZF8
    Model revision number: P0
    Motherboard revision number: A0
    Model number: WS-C2950T-24
    System serial number: FOC0822X3C6
    Configuration register is 0xF


    2950- 24 port
    SW29xx - Same




    3550- 24 port non-PoE
    Switch>show ver
    Cisco Internetwork Operating System Software
    IOS (tm) C3550 Software (C3550-I9Q3L2-M), Version 12.1(22)EA7, RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2006 by cisco Systems, Inc.
    Compiled Fri 27-Jan-06 22:55 by antonino
    Image text-base: 0x00003000, data-base: 0x006D1AB4


    ROM: Bootstrap program is C3550 boot loader


    Switch uptime is 1 minute
    System returned to ROM by power-on
    System image file is "flash:c3550-i9q3l2-mz.121-22.EA7/c3550-i9q3l2-mz.121-22.EA7.bin"


    cisco WS-C3550-24 (PowerPC) processor (revision R0) with 65526K/8192K bytes of memory.
    Processor board ID CAT1006N1G0
    Last reset from warm-reset
    Running Layer2/3 Switching Image


    Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces


    Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces


    Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE 802.3 interface


    Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE 802.3 interface


    24 FastEthernet/IEEE 802.3 interface(s)
    2 Gigabit Ethernet/IEEE 802.3 interface(s)


    The password-recovery mechanism is enabled.
    384K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:17:0E:32:10:80
    Motherboard assembly number: 73-5700-12
    Power supply part number: 34-0966-04
    Motherboard serial number: CAT10061C29
    Power supply serial number: DTH10056RQV
    Model revision number: R0
    Motherboard revision number: A0
    Model number: WS-C3550-24-SMI
    System serial number: CAT1006N1G0
    Configuration register is 0x10F


    3550- 24 port non-PoE
    Same


    Cisco IP phone
    7940 Sccp
    7940 Sccp
    7940 Sccp


    Modules:-


    vwic-mft-E1
    vwic-mft-T1
    pvdm-256k-4
    pvdm-256k-4
    pvdm2- 16
    pvdm2- 16
    wic-2T
    wic-2T


    Laptop:-
    My laptop has 6gb Ram and I3 processor. 1.80 GHz
    Call manager 8.5 is installed on vmware.
    Reply With Quote Quote  

  2. SS -->
  3. Senior Member
    Join Date
    Sep 2014
    Location
    Minnesota
    Posts
    766

    Certifications
    CCNA:R&S, VCA6-DCV, Sec+
    #2
    as far as voice goes, this equipment only supports up to version 4.x. And, well the test is on something like 8.6. you are better off getting equipment that can run at least the version that your going to see on the exam.

    the 2950 switches look ok. The ios on the 3550 is terible outdated.

    The routers have out dated ios also. But, your going to need to upgrade the ram before installing a newer ios version. And, the same goes for flash. except for the 1760.
    Reply With Quote Quote  

  4. Junior Member
    Join Date
    Sep 2017
    Posts
    15
    #3
    Thanks for your valuable time sir. Can you share the IOS name for Switches and Routers? I'll upgrade Ios, Ram and Flash for 2600xm. I have recently ordered 2821 router.
    Reply With Quote Quote  

  5. Senior Member
    Join Date
    Sep 2014
    Location
    Minnesota
    Posts
    766

    Certifications
    CCNA:R&S, VCA6-DCV, Sec+
    #4
    c2950-i6k2l2q4-mz.121-22.EA13.bin ios on the one switch is good enough for the other 2950 switches. Just copy it to them. Don't have the ios names handy right now.
    for the 2821 your going to want 512 ram and at least 128cf and 256mb cf would be better
    i'd upgrade the routers to 128mb ram and 32mb flash.


    Reply With Quote Quote  

  6. Junior Member
    Join Date
    Sep 2017
    Posts
    15
    #5

    Default Thanks

    2620xm


    Do I have to upgrade the boot rom as well. If yes what size I can upgrade upto. Please suggest the supported size as per the hardware.


    Boot Rom - ?


    Flash memory- 32 mb
    48 mb


    Dram - 128 mb + 32 mb
    128 mb + 64 mb
    128 mb + 128 mb
    Reply With Quote Quote  

  7. Senior Member
    Join Date
    Sep 2014
    Location
    Minnesota
    Posts
    766

    Certifications
    CCNA:R&S, VCA6-DCV, Sec+
    #6
    the boot rom you have supports up to 128mb ram. That is enough for what your doing. So, no need to upgrade the boot rom.
    you want to have a total of 32mb of flash. I think the 2600xm come with 16 on board by default. So, you only need add a 16mb flash stick.
    And, the 1760 comes with 32mb by default. not sure what the default ram is. google the cisco memory upgrade on those routers to find out.

    128/32 is what your wanting to get to
    Reply With Quote Quote  

  8. Junior Member
    Join Date
    Sep 2017
    Posts
    15
    #7
    Perfect. Thanks Sir.
    Reply With Quote Quote  

  9. Senior Member
    Join Date
    Sep 2014
    Location
    Minnesota
    Posts
    766

    Certifications
    CCNA:R&S, VCA6-DCV, Sec+
    #8
    and for the ios feature set to get, check out this picture
    https://www.cisco.com/c/en/us/produc...0801af451.html

    anyway, you will need at least ip base for the ccna. of course, for voice you'd need ip voice. Then for the ccna security, you need the adv security feature set. And, to do ipv6 along with security, service provider, and voice you will need the adv ip services feature set. And lastly, to do everything that is possible, get the adv enterprise feature set.

    as you can see more is better
    Reply With Quote Quote  

  10. Junior Member
    Join Date
    Sep 2017
    Posts
    15
    #9
    Thanks Sir. If i'll installed adv enterprise feature set on all the routers It will work for R&S+voice+security.


    1- I have 2 2620xm and they have 1 FE0/0 port available but both routers have WIC-2T & WIC-1B-S/T-V3 1-Port ISDN WAN Interface Card. 1760 router have VWIC-2MFT and it also have 1 FE0/0. How will I make the connections b/w them.


    ISP-------RJ45cable-------->2620xm FE0/0/--WIC2T port----------how will I connect---------->2600xm FE0/0/--WIC2T------------how will I connect------------->1760--VWIC-2MFT.....SW


    SW2950----------> SW2950--------->SW2950-------->SW3550-------->SW3550------->


    Can someone help me with the different topology or how to make network architecture with these devices?


    Next month begining might i'll add 1841(64mb flash & 256mb ram), (64mb flash & 256mb ram). 2821 I'll get Nov 1st weerk. 2821 model-- No information about the ram and flash till now.
    Reply With Quote Quote  

  11. Senior Member
    Join Date
    Sep 2014
    Location
    Minnesota
    Posts
    766

    Certifications
    CCNA:R&S, VCA6-DCV, Sec+
    #10
    If i'll installed adv enterprise feature set on all the routers It will work for R&S+voice+security.

    Yes, it will

    Can someone help me with the different topology or how to make network architecture with these devices?

    Well, there is the easy straight forward way. and there is the "I'm a network engineer and I know how to deal with this".

    1) the straight forward way
    you put a router that has 2 fast ethernet (or better) ports between networks to route the traffic. unfortunately, the majority of your routers only have one fast ethernet port.
    2) the "I know some networking" solution
    You divide a switch into vlans. setup a router on a stick to route traffic between the vlans. setup nat to connect to your isp. setup routing to send all internet traffic to the port connected to your isp. You get all that setup and working, and know what your doing, you have half the ccna test passed.

    isp <-rj45-> vlanA <-trunk1-> router 1 <-trunk1-> vlanB <-trunk2-> router 2 <-trunk2-> vlanC etc.
    and you can always use trunking to "extend" your vlans to other switches.

    but, doing this is more of a "ccna final exam/are you ready for the real world" kind of thing. This is way beyond Chapter 1 of the CCNA book. But, it is all things a CCNA should be able to do.
    Last edited by clarson; 10-02-2017 at 02:51 PM.
    Reply With Quote Quote  

  12. Junior Member
    Join Date
    Sep 2017
    Posts
    15
    #11
    tech exam topo.JPG

    Thanks Much. You're awesome. I'm sharing a Packet Tracer Screenshot.
    Last edited by sam88; 10-03-2017 at 09:49 AM.
    Reply With Quote Quote  

+ Reply to Thread

Social Networking & Bookmarks