+ Reply to Thread
Results 1 to 10 of 10
  1. Junior Member
    Join Date
    Oct 2014
    Posts
    8
    #1

    Default Help needed on ASA issue!

    Please help as I am trying to connect my ASA to my Microsoft loopback adapter which is already bridged between with my wireless nic.I made sure I rebooted after I created the loopback adapter and also rebooted when I bridged both the wireless and loopback adapters.

    Inside the ASA I configured the outside interface:
    (asaconfig)#int gigabitethernet 1
    (asaconfig)#nameif outside
    (asaconfig)#security-level 0
    (asaconfig)#ip add dhcp

    My ip address of my wireless router is 192.168.0.1 and my ip address of the computer/loopback adapter is 192.168.0.5. What can I do to pull an ip address from my dhcp server (wireless router) to my ASA? Once it's successful there should be pulled ip address under my interface gigabitethernet 1 via dhcp instead of saying unassigned.
    Attached Images Attached Images
    Reply With Quote Quote  

  2. SS -->
  3. /threadkiller ande0255's Avatar
    Join Date
    Sep 2013
    Location
    Around
    Posts
    1,160

    Certifications
    CCNA R&S, Voice, Security
    #2
    Could you paste the output from 'sh ver' ?
    Reply With Quote Quote  

  4. Junior Member
    Join Date
    Oct 2014
    Posts
    8
    #3
    Using Windows 8.1 and enabled compatibility mode for windows 7 on Winpcap with recent version. I disabled my firewall on computer and on wireless router. Disabled Antivirus. I even assigned a static ip under int gig 1(outside int) in the same subnet of 192.168.0.0/24 and still cant ping to my pc or wireless router.
    Reply With Quote Quote  

  5. Junior Member
    Join Date
    Oct 2014
    Posts
    8
    #4
    Cisco Adaptive Security Appliance Software Version 8.4(2)

    Compiled on Wed 15-Jun-11 18:17 by builders
    System image file is "Unknown, monitor mode tftp booted image"
    Config file at boot was "startup-config"

    ciscoasa up 11 secs

    Hardware: ASA 5520, 1024 MB RAM, CPU Pentium II 1000 MHz
    Internal ATA Compact Flash, 256MB
    BIOS Flash unknown @ 0x0, 0KB


    0: Ext: GigabitEthernet0 : address is 00ab.cd92.5200, irq 0
    1: Ext: GigabitEthernet1 : address is 00ab.cd92.5201, irq 0
    2: Ext: GigabitEthernet2 : address is 00ab.cd92.5202, irq 0
    3: Ext: GigabitEthernet3 : address is 0000.abbe.1103, irq 0
    4: Ext: GigabitEthernet4 : address is 0000.abc7.e304, irq 0
    5: Ext: GigabitEthernet5 : address is 0000.ab82.c905, irq 0

    Licensed features for this platform:
    Maximum Physical Interfaces : Unlimited perpetual
    Maximum VLANs : 100 perpetual
    Inside Hosts : Unlimited perpetual
    Failover : Active/Active perpetual
    VPN-DES : Enabled perpetual
    VPN-3DES-AES : Enabled perpetual
    Security Contexts : 2 perpetual
    GTP/GPRS : Disabled perpetual
    AnyConnect Premium Peers : 5000 perpetual
    AnyConnect Essentials : Disabled perpetual
    Other VPN Peers : 5000 perpetual
    Total VPN Peers : 0 perpetual
    Shared License : Disabled perpetual
    AnyConnect for Mobile : Disabled perpetual
    AnyConnect for Cisco VPN Phone : Disabled perpetual
    Advanced Endpoint Assessment : Disabled perpetual
    UC Phone Proxy Sessions : 2 perpetual
    Total UC Proxy Sessions : 2 perpetual
    Botnet Traffic Filter : Disabled perpetual
    Intercompany Media Engine : Disabled perpetual

    This platform has an ASA 5520 VPN Plus license.

    Serial Number: 123456789AB
    Running Permanent Activation Key: 0x4a3ec071 0x0d86fbf6 0x7cb1bc48 0x8b48b8b0 0xf317c0b5
    Configuration register is 0x0
    Configuration has not been modified since last system restart.
    Reply With Quote Quote  

  6. Senior Member RouteMyPacket's Avatar
    Join Date
    Aug 2012
    Location
    Dallas
    Posts
    1,077

    Certifications
    CCWKIA (Cisco Certified Wannabe Know It All)
    #5
    Reply With Quote Quote  

  7. Junior Member
    Join Date
    Oct 2014
    Posts
    8
    #6
    Thats just a how to for connecting asdm to the asa. In this problem I need to have the asa pull and ip address via dhcp from my wireless router which is also connected to my loopback adapter(bridged to my wifi adapter).
    Reply With Quote Quote  

  8. Junior Member
    Join Date
    Oct 2014
    Posts
    8
    #7
    Can anyone help me solve this?
    Reply With Quote Quote  

  9. Senior Member alan2308's Avatar
    Join Date
    Apr 2010
    Location
    Ann Arbor, MI
    Posts
    1,807

    Certifications
    CCNA, CCNA Sec, MCSA 2008, MCSA 2012, CISSP
    #8
    Quote Originally Posted by daniel.mark View Post
    Thats just a how to for connecting asdm to the asa.
    Yes, but connectivity is connectivity whether its for ASDM or for DHCP.
    Reply With Quote Quote  

  10. Junior Member
    Join Date
    Oct 2014
    Posts
    8
    #9
    I followed the steps to the asa setup and dhcp setup. For some reason I cant get my interface g0/1 to pull a dhcp ip address from
    My wireless router.
    Reply With Quote Quote  

  11. Padawan d4nz1g's Avatar
    Join Date
    May 2013
    Location
    Brazil
    Posts
    418

    Certifications
    CCNP, BCNE, CCNA, CCNA Sec, MCSA2k8, IPv6 Silver
    #10
    Have you tried to sniff the traffic?
    2017 - CCIE RS
    Labbing, labbing, labbing.
    Reply With Quote Quote  

+ Reply to Thread

Social Networking & Bookmarks