+ Reply to Thread
Results 1 to 1 of 1

Thread: VPN on a Stick

  1. Member
    Join Date
    Dec 2012

    Default VPN on a Stick

    I have set up VPN on a stick on my router and my VPN is established but I cant get routed back to the internet afterthe client gets the VPN connection.

    What I require is that users connect to the router through a VPN (on cisco router) and then the VPN traffic get routed through the internet to a remote network. I am required to use a sing interface so I used VPN on a stick.(VPN with Nat on a stick).

    Below is my configuration:

    aaa new-model
    aaa authentication login userauthen local
    aaa authorization network groupauthor local

    username user password 0 cisco

    crypto isakmp policy 3
    encr 3des
    authentication pre-share
    group 2

    crypto isakmp client configuration group vpnclient
    key cisco123
    pool ippool

    crypto ipsec transform-set myset esp-3des esp-md5-hmac

    crypto dynamic-map dynmap 10
    set transform-set myset

    crypto map clientmap client authentication list userauthen
    crypto map clientmap isakmp authorization list groupauthor
    crypto map clientmap client configuration address respond
    crypto map clientmap 10 ipsec-isakmp dynamic dynmap

    interface Loopback0
    ip address
    ip nat inside
    ip virtual-reassembly

    interface gi0/1
    ip address 216.x.x.x
    ip nat outside
    ip virtual-reassembly
    ip policy route-map VPN-Client
    duplex auto
    speed auto
    crypto map clientmap

    ip local pool ippool

    ip route 216.x.x..y

    ip nat inside source list 101 interface gi0/1 overload

    access-list 101 permit ip any any
    access-list 144 permit ip any

    route-map VPN-Client permit 10
    match ip address 144
    set ip next-hop
    Last edited by ahmedahmed; 03-14-2013 at 11:49 PM.
    Reply With Quote Quote  

+ Reply to Thread

Social Networking & Bookmarks