+ Reply to Thread
Results 1 to 4 of 4
  1. Senior Member
    Join Date
    Jan 2012
    Posts
    1,237

    Certifications
    BS IT (CCNA R&S, Security, Voice) CCDA, MCP XP, A+, L+, P+, LPIC-1, SUSE CLA
    #1

    Default Jabber Iphone on CME hangs up call when answered

    I have shared lines configured with sccp and sip phones. It was originally working fine for a couple of days but now it has issues. When connected via wifi the Jabber client can make calls on net and off net but disconnects when answering a received call. I have it set up on a Samsung Android and after playing with the codecs it seems to be working. On a Iphone 6 when trying to answer a call from the outside it hangs up.

    Odd part is I found when removing the "no create profile" under voice register global and recreating it "create profile" it seems to work for a few minutes. Once it starts acting up again I get this error message immediately on the screen when the iphone 6 picks up then hangs up:


    000112: Nov 5 16:15:26.883: %VOICE_IEC-3-GW: CCAPI: Internal Error (Software Error): IEC=1.1.180.1.13.112 on callID 43 GUID=BC16ED19643D11E4804EAD3623D3BC78


    ROUTER-2911#sh voice iec description 1.1.180.1.13.112
    IEC Version: 1
    Entity: 1 (Gateway)
    Category: 180 (Software Error)
    Subsystem: 1 (CCAPI)
    Error: 13 (Software Error)
    Diagnostic Code: 112

    We were running c2900-universalk9-mz.SPA.152-4.M4.bin, I just upgraded to c2900-universalk9-mz.SPA.153-1.T.bin still the same issue. Anyone have any ideas?


    voice register dn 1
    number 110
    allow watch
    name Jacks-Iphone 110
    shared-line max-calls 16
    label Jacks--Iphone 110

    voice register dn 2
    number 111
    allow watch
    name Tim-Android 111
    shared-line max-calls 16
    label Tim-Android 111
    voice register pool 3
    registration-timer max 720 min 660
    id mac 711E.1118.211B
    session-transport tcp
    type CiscoMobile-iOS
    number 1 dn 1
    dtmf-relay rtp-nte
    voice-class codec 1
    username Jack password xxxx
    no vad

    voice register pool 4
    registration-timer max 720 min 660
    id mac 1115.D11B.A11C
    session-transport tcp
    type Jabber-Android
    number 1 dn 2
    number 2 dn 7
    dtmf-relay rtp-nte
    voice-class codec 1
    username Tim password xxxx
    no vad

    !
    voice class codec 1
    codec preference 1 g711ulaw
    codec preference 2 g729r8
    ROUTER-2911#
    In life you have to make your own opportunities. Don't let anyone stop you from your dreams to many negative people want you to fail because they can't succeed.
    Reply With Quote Quote  

  2. SS -->
  3. Senior Member JeanM's Avatar
    Join Date
    Mar 2012
    Location
    California
    Posts
    1,105

    Certifications
    CCNA, MCP, S+, N+, A+
    #2
    Didn't know you could run Jabber client with CME (vs. CUCM), what version of CME you have running?

    What version of Jabber, latest or ?
    Reply With Quote Quote  

  4. Senior Member
    Join Date
    Jan 2012
    Posts
    1,237

    Certifications
    BS IT (CCNA R&S, Security, Voice) CCDA, MCP XP, A+, L+, P+, LPIC-1, SUSE CLA
    #3
    Yes sir it works on CME *Jabber Voice only. For Apple phones it runs on cme ver 8.6 which is 15.1. For Android phones it runs on cme version 9.1 IOS 15.2 but with Android phones its really limited to the manufacturer and Android version etc. I've seen it work on Samsung Galaxy 3 and Note but doesn't work on HTC. Jabber version is whatever thats in the Android/Apple phone marketplace not sure what version off the top of my head.

    ROUTER(config)#voice register pool 8
    ROUTER(config-register-pool)#type ?
    just posted relevant type
    CiscoMobile-iOS Cisco Mobile App on iPhone
    Jabber-Android Cisco Jabber App on Android

    It actually fairly simple to get working.
    Last edited by dmarcisco; 11-19-2014 at 03:38 PM.
    In life you have to make your own opportunities. Don't let anyone stop you from your dreams to many negative people want you to fail because they can't succeed.
    Reply With Quote Quote  

  5. Senior Member JeanM's Avatar
    Join Date
    Mar 2012
    Location
    California
    Posts
    1,105

    Certifications
    CCNA, MCP, S+, N+, A+
    #4
    CME version(s) I got on 2811 is older than that, was looking forward to try this..

    Looks like you need to get to 15.1/15.2 train version of router ios to get CME 8.6/9.1

    http://www.cisco.com/c/en/us/td/docs.../33matrix.html
    Reply With Quote Quote  

+ Reply to Thread

Social Networking & Bookmarks