+ Reply to Thread
Results 1 to 7 of 7

Thread: 1750 router

  1. Junior Member
    Join Date
    Feb 2007
    Posts
    10
    #1

    Default 1750 router

    I have just got a 1750 router and a VIC-2FXS card. I cannot see the card when I do a show diag. I am under the assumption that the IOS needs updating...does anyone have any ideas about this ?
    Reply With Quote Quote  

  2. SS -->
  3. Cisco Moderator mikej412's Avatar
    Join Date
    May 2005
    Location
    Chicago
    Posts
    10,190

    Certifications
    CCNP CCIP CCSP CCVP CCDP CCDA CCNA CS-CIPSS CS-CIPTDS CS-CIPTOS CS-CIPCSS CS-CFWS CS-CVPNS CS-CISecS ISSP 4013 4011
    #2
    You may need a PVDM Module for that 1750.
    Reply With Quote Quote  

  4. Junior Member
    Join Date
    Feb 2007
    Posts
    10
    #3

    Default router for ccvp

    Damn that means more money
    what is a suitable router other than the 1750 for CCVP ?
    Reply With Quote Quote  

  5. Cisco Moderator mikej412's Avatar
    Join Date
    May 2005
    Location
    Chicago
    Posts
    10,190

    Certifications
    CCNP CCIP CCSP CCVP CCDP CCDA CCNA CS-CIPSS CS-CIPTDS CS-CIPTOS CS-CIPCSS CS-CFWS CS-CVPNS CS-CISecS ISSP 4013 4011
    #4

    Default Re: router for ccvp

    Quote Originally Posted by blowfish
    Damn that means more money
    Building a home CCVP lab could be more expensive than getting a CCIE R&S.

    Quote Originally Posted by blowfish
    what is a suitable router other than the 1750 for CCVP ?
    Depending on what you are doing, the 2600s, 3600s, 3700s, 6500s will do some of things you need for the CCVP.

    I haven't tried Dynamips/Dynagen for the Voice stuff yet -- but I think someone posted they were running CallManager Express with it. I think anything that doesn't need the Voice Modules is fair game for Dynamips.
    Reply With Quote Quote  

  6. Junior Member
    Join Date
    Feb 2007
    Posts
    10
    #5

    Default 1750 Router

    thanks for the info Mike
    will look into CME on dynamips and sell the 1750
    Reply With Quote Quote  

  7. Cisco Moderator mikej412's Avatar
    Join Date
    May 2005
    Location
    Chicago
    Posts
    10,190

    Certifications
    CCNP CCIP CCSP CCVP CCDP CCDA CCNA CS-CIPSS CS-CIPTDS CS-CIPTOS CS-CIPCSS CS-CFWS CS-CVPNS CS-CISecS ISSP 4013 4011
    #6

    Default Re: 1750 Router

    Quote Originally Posted by blowfish
    will look into CME on dynamips and sell the 1750
    If you are looking at this as a CCVP lab, you'll need several routers -- and you can mix Dynamips with real routers (and switches).

    There are no simulated Voice modules for Dynamips, so you'd still need some real routers for the voice ports. The PVDM for the 1750 may be cheaper than buying a 26xx or 36xx and the NM-1V or NM-2V you'd need to use that VIC-FXS.
    Reply With Quote Quote  

  8. Junior Member
    Join Date
    Feb 2007
    Posts
    10
    #7

    Default PVDM

    opened up the 1750 and there was a PVDM nicely seated there... RESULT !
    just had to change the IOS version and can now see the VIC-2FXS card
    good bargain that 1750 ;>
    Reply With Quote Quote  

+ Reply to Thread

Social Networking & Bookmarks