+ Reply to Thread
Results 1 to 8 of 8
  1. Senior Member
    Join Date
    Oct 2005
    Posts
    145

    Certifications
    CCNA, CCNP, CCIE WR, JNCIA-ER
    #1

    Default Advertised Distance(AD) vs Feasible Distance(FD)

    Hello Mates,

    confused with the difference between AD and FD the new BSCI book gives a some what confusing definition that sounds the same for both.

    It says AD is the cost between the next hop router and the destination.

    And FD is the sum. Then that would mean to me they're both the same thing.

    I'm confused. Please someone help me understand this. Thanks in Advance.
    Reply With Quote Quote  

  2. SS -->
  3. Resident Underachiever EdTheLad's Avatar
    Join Date
    May 2005
    Location
    Globe trotter, nfa
    Posts
    2,118

    Certifications
    CCNP/CCIP/IE Written
    #2

    Default Re: Advertised Distance(AD) vs Feasible Distance(FD)

    FD is the local cost to the destination network.To reach a destination you route packets via
    a next-hop router i.e. down stream router or in eigrp terminology,the successor.The downstream router also has a local cost i.e. FD to reach the destination.When a downstream router advertises its FD to an upstream router,this advertised FD is known as the AD on the upstream router.
    So basically to get to network x my local cost is 5 i.e. my FD is 5, my next hop router B who advertises this network is closer to the destination x and has a FD of 3.When an update arrives from B with a cost of 3 this is know locally as the AD,the cost configured on
    the interface connected to B is 2,so adding the AD and the cost of the link to B i get the FD of 5.
    A little long winded but i think you should get the idea.
    Reply With Quote Quote  

  4. Product Manager NightShade1's Avatar
    Join Date
    Jan 2007
    Location
    Panama
    Posts
    433

    Certifications
    ACFE OmniSwitch R6, ACFE WLAN R6, ACMA, ACMP, ACSP, ACSS,AACS,CPSS,WQSS, FCNSP V5, FCNSA V5, MCITP: SA, MCTS: Hyper V
    #3
    In addition to what our mate said above:


    This is simple

    FD=fiasable distance

    AD=advertise distance

    AD = distance from the neighbor router to the destiny

    FD = AD+the cost between your router and his neighbor

    is simple as that
    Simple example

    R1---------R2--------R3---------R4

    Cost from R1 to R2 is 4

    Cost from R2 to R4 is umm 8 so AD is 8 cause is the cost from the neighbor of R1 to destiny

    FD = 4+8=12

    in this example i just gave you a uniroute from R1 to R4 but normally there will be many routes with many differets FD, the router pick the one with lower FD and put it in the routing table.
    [/b]
    Reply With Quote Quote  

  5. Senior Member
    Join Date
    Oct 2005
    Posts
    145

    Certifications
    CCNA, CCNP, CCIE WR, JNCIA-ER
    #4
    Man u guys are the best, especially I loved it how nightshade1 has it illustrated for me. Thanks a bunch fellows.
    Reply With Quote Quote  

  6. Product Manager NightShade1's Avatar
    Join Date
    Jan 2007
    Location
    Panama
    Posts
    433

    Certifications
    ACFE OmniSwitch R6, ACFE WLAN R6, ACMA, ACMP, ACSP, ACSS,AACS,CPSS,WQSS, FCNSP V5, FCNSA V5, MCITP: SA, MCTS: Hyper V
    #5
    You are welcome buddy.

    If you google a bit you will see better graphics and examples of this.
    Reply With Quote Quote  

  7. Senior Member
    Join Date
    Nov 2005
    Location
    Singapore
    Posts
    183

    Certifications
    B.S. in Computer & Information Science, Security+, Network+, A+, CCNA, completed BSCI, BCMSN (working for CCNP)
    #6
    You studying the new book also eh? I am on the lab on page 148 now. I set the lab up. Looking at all the debugging information for EIGRP when a route change occurs is going to take me a little time to understand. The next chapter OSPF I dove into a little bit next. I hope a new Exam Cram book or something comes out so I can see what kind of questions they are looking to ask.

    Good luck with your studies.
    Reply With Quote Quote  

  8. Junior Member Registered Member
    Join Date
    Jan 2013
    Posts
    1
    #7

    Default Advertised Distance(AD) vs Feasible Distance(FD)

    Thanks a ton EdTheLad & NightShade1. i was very confused before i read you post.
    Reply With Quote Quote  

  9. Senior Member Danielh22185's Avatar
    Join Date
    Apr 2012
    Location
    DFW Area
    Posts
    1,172

    Certifications
    CCNP R&S, CCNA, CCENT
    #8
    I'm Curious what new book you are studying...
    Currently Studying: IE Stuff...kinda...for now...
    My ultimate career goal: To climb to the top of the computer network industry food chain.
    "Winning means you're willing to go longer, work harder, and give more than anyone else." - Vince Lombardi
    Reply With Quote Quote  

+ Reply to Thread

Social Networking & Bookmarks